AGESIN® Acrylated Polydimethylsiloxane
Product Number: AgeSin® UV-D7100
Completely replaced– Tego Rad 2100
Specification:
| Composition | Silicone polyether acrylate with crosslinked free radical |
| Appearance | Light to dark green clear liquid |
| Solvent | — |
| Density | 1.03-1.07g/ml(25±1)℃ |
| Viscosity | 100-800 mPa·s (Rotating viscometer)(25±0.2)℃ |
| Active substance | 100% |
| Flash point | ≥100℃ |
Note: This datasheet is intended to give typical results, not standard.Subject to COA.
Application system:
UV Cure.
Properties:
- Radiation curing reactive silicone additive to improve leveling and overprint.
- Used for vacuum electroplating primer without affecting the adhesion of aluminum coating.
- Good compatibility in varnish.
Incorporation:
Easy to add with pre-diluted solvent the same as that in the coating system. Can added as post-addition.
Suggest addition:
Addition to total formulation 0.1-1.0%
Applicate recommendation
| Transparency in varnish | 5 |
| Flow leveling | 3 |
| Slip | 1 |
| Stick resistance | 1 |
| Defoaming | 0 |
0=unavailable 5=very effective
package
25KG / 180KG
Storage:
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
Protecting the product from leakage, rain and insolation during transportation.
Details
| Product description: | Silicone polyether acrylate with crosslinked free radical |
|---|---|
| Equivalent alternatives | TEGO Rad 2100 |
| Application system | UV Cure |
| Viscosity | 100-800 mPa·s (Rotating viscometer)(25±0.2)℃ |
| Package | 25KG or 180KG/drum |
Reviews
There are no reviews yet.